Kinetico Essential
- Kinetico Essential series due to its design doesn't have limitations, which electrical systems has.
- The filter is designed to operate according to a scheme in which the system consists of one column with the filter material. Purified water is used for washing of the ion exchange resin, it provides a greater washing efficiency and greatly reduce salt and water consumption for the process, and prolongs the life of the filter.
- The system does not need to be connected to the power! It eliminates the risk of electric shock, the probability of failure of the microprocessor and other problems.
- The system is running on the counter. Salt and water are being used for regeneration only after one of the columns runs out of its resin resource.
Specifications
Model | Essential 8 | Essential 11 | Essential 17 |
---|---|---|---|
Maximum allowable concentration of total hardness (mg-ekv/l) / ppm | 12,3 / 616 | 14,3 / 718 | 19 / 958 |
Maximum alowable concentration of ferrous iron, mg/l | 0 - 0.5 | ||
Minimum pH, (standard units) | 3 - 12 | ||
Regeneration type | Backflow | ||
Fill type and its quantity | Filtering media: Small resin – 10.5 l sandwiched cation exchange resin layer | ||
Minimum/maximum water temperature °C | 2 - 50 | ||
Performance minimum/maximum | 28 - 30 l/min | 28 - 32 l/min | 28 - 36 l/min |
Water consumption per regeneration in liters | 25 | 25 | 32 |
Time for regeneration in minutes | 15 | ||
Salt consumption per regeneration, kg | 0.36 | 0.36 | 0.73 |
The maximum amount of salt in the salt compartment | 23.6 kg | 27 kg | 27 kg |
Dimensions of the salt tank diameter/height | - | ||
Pressure drop at the operating flow, atm | down to - 0.5 | ||
The maximum flow rate in the discharge conduit during regeneration - backwash l/min. | 0.60 | ||
Minimum/maximum water pressure during washing, bar | 1.7 - 8.6 | ||
Dynamic pressure | 1 - 8.6 | ||
The frequency of regeneration | by counter (1.1 - 94 l/min polypropylene turbine) | ||
Filter height, cm | 50.5 | 60.7 | 78.5 |
Base area, width, depth, cm | 29.2 х 45.2 | 29.7 х 45.5 | 30.2 х 46.2 |
Electrical specifications | None | ||
Filter weight (shipping / operating), kg | 14.5 / 45.4 | 22.7 / 59.0 | 26.8 / 86.2 |
Connections for waterpipe | «3/4» inch, outside thread with clips (tube standard) |
Requirements for feed water
Water hardness, mg-ekv/l (ppm) | < 10.2 / 513 |
The content of ferrous iron, mg/l | < 0 - 0.5 |
The content of ferric iron, mg/l | < 0 |
The content of manganese, mg/l | < 1 |
PН | 3 - 12 |
The content of free chlorine Cl2, ml/l | < 0.5 |
The content of oil products, mg/l | < 0.5 |
Attention: Kinetico Essential softeners do not remove iron (in the organic complexes), hydrogen sulfide, bacterial contamination, oil products and organic substances.
Equipment
Softener assembly | 1 pc. |
Overflow fitting | 1 pc. |
Drain fitting | 1 pc. |
Drain tube D = 12 MM (1/2”), L = 1.5 М | 1 pc. |